Hydraulic press size range: 45”/46”/47”/48”/51”/52”/55”/57”/66”
Key characteristics off all our hydraulic presses are:
Tested to million cycles
Easy installation with integrated PCI (option)
Pit less or shelf mounted
Highly accurate alignment tolerance maintained
Robust press guide columns separate from squeeze system
Bottom platen stationary
Extra-long guide bearings
Loader (and unloader) sturdy design with positive stops and large shock absorbers
Center mechanism large bearing surfaces and good seal design
Innovative hydraulic system energy savings
Infinite mold height adjustment
Quick mold and bladder change system (options)
Long warranty period offered for hydraulic oil leak free system
Compliance with the latest CE safety regulations
Easy access for maintenance
Applicable Mold | Two half mold |
Max.Squeezing force | 110T/mold |
Heat shield I.D. | 935mm |
Max.mold O.D. | Φ900mm |
Distance between Top&bottom platen | 1200mm |
Mould Height | 105-260mm |
Mould adjusting | outomatic,cylinder |
Heating device | Platen |
Bead diameter | 15''-21'' |
Platen O.D. | Φ910mm |
Max.green tire weight | 10kg |
Max.green tire height | 400mm |
Max.green tire O.D. | Φ575mm |
Max. finished tire height | 200mm |
Control | common control |
Mold open/close time | ≤15 sec |
Net cycle time | ≤60 sec |
high-pressure oil cylinder | 21MPa |
Medium-pressure oil cylinder | 4MPa |
power air pressure | 0.6MPa |
Control air pressure | 0.35MPa |
Max.intemal pressure | 1.6MPa |
Max.external pressure | 2.2MPa |
Max.shaping pressure | 0.2MPa |